Welcome to Vatac !
Language
Site Map
Gate Valve

China gate valve manufacturers, gate valve suppliers, gate valve factory. Vatac Cast or Ductile Iron Metal Seated Gate Valves are with Bronze Trim. The rising stem wedge gate meets MSS-SP70 speciications. Valves are designed to be either in a fully open or fully closed position. Throttling is not recommended. Providing full low in the completely open position, a minimum pressure drop occurs. When throttling is required, a globe valve is preferred with a sacriice of pressure drop.

 

The positive guiding motion of the Vatac Metal Seated Gate Valve allows the valve to be installed in any position in a pipeline, but it is suggested to install in the vertical position if possible. The usage of Vatac Gate Valves is limitless in commercial and industrial applications of water, steam, gases and general piping. Cast Iron Gate Valves are not recommended for applications of slurry or abrasive service.

 

STANDARDS COMPLIANCE:
» EN1171, DIN 3202 / 3352 F4 or F5, BS 4504
» ASME B16.10, BS EN558-1 (DIN 3202-F4 or F5)
» ASME B16.1 CLASS 125, ANSI/AWWA C111/A21.11, AWWA C606, EN1092-2, EN12226-1

 

The Vatac Metal Seated Gate valves have been solving fluid control problems in water, potable water and general industrial applications for over 30 years. Today Vatac Technologies is putting that experience to work for you in more ways than ever before- meeting your changing needs with dependable Vatac Gate valves and accessories.

Please feel free to contact with us at sales@cnvchina.com or filling up an enquiry form instructed at the bottom, You will get an effective response within 24 hours from Vatac sales representative.
Thanks for your valued time with interest!

STANDARDS COMPLIANCE:
» AWWA C500 » DIN 3352 » EN 1171 » EN 1074 » BS-5150 » BS-5163 » EN1171 » EN1074-1&2 » JIS B2062 » KS B2332
» ASEM B16.10 » DIN3202 F4 » EN558-1 14 Series or F5 » EN558-1 15 Series
» BS 5163» EN558-1 Series 13 » JIS B2002;
» ASME B16.1 CL125, CL150 » DIN 2532 / 2533 » EN1092
» EN1092-2 » ISO 7005-2 » JIS B2212 » 2239
» API 598 » ISO 5208 » EN 12266 » DIN 3230 » EN12226-1 » JIS B2003

FEATURES:
» OS*Y, Rising Stem  
» Cast or Ductile Iron Body with B ronze Mounted
» Stainless Steel, A276 Type 410 or GR. 431 Shaft
» Fusion Bonded Epoxy Coating
» Sizes: DN50 through DN800 / 2" thru 32""
» Body Styles: Flanged, Socket Welded, Grooved or M.J Ends
» Pressure Class: PN10 or PN16, ASME #125, #150, #250
» Actuation: Nut-Key, Handwheel, Gear, Electric, Hydraulic or E-Hydraulic

* Subject:  
* Message:  
* Contact person:  
*  Email:  
  (Enter the correct contact information, to ensure that we can contact you.)
Company Name:  
*  Phone:  
  (Enter the correct contact information, to ensure that we can contact you.)
Fax:  
Address: